Description
Leica M (M4/3) Mount Mirrorless Camera Body.
| Lens Mount: | Leica M Rangefinder Lens |
| Body Mount: | Micro Four Thirds (MFT, M4/3) Mount Mirrorless Camera Body |
| Manufacturer: | Fotodiox Inc. |
Note:
- • This is a manual adapter, so lens functions that rely on electronic communication with the camera body (autofocus, AE metering, image stabilization, etc.) will be disrupted.
- • Some cameras need to be set a certain way to work with our adapters or you may get a message such as ‘Error Lens Not Attached – Check lens’. Please check the support articles on the Fotodiox Knowledge Base for possible solutions on a variety of camera brands.
- • ‘Focus-By-Wire’ lenses (such as Canon’s STM or Nikons AF-P) requires power to engage the manual focus rings on the lens, since manual lens mount adapters do not power the lens, those lenses will not be able to focus.
- • Set your exposure manually or meter using your camera’s Aperture Priority (stop-down) mode.
- • If your lens does not have a manual aperture control ring, the lens aperture will revert to its default position, which depending on the lens is either stopped down to its largest f-stop or opened up to its smallest f-stop.
- • To determine what the new ‘Crop Factor’ or ‘Equivalent Focal Length’ of the lens when used on your camera will be, please check the Fotodiox Knowledge Base article.
- • To remove the adapter, move the release lever (circled in red) in the direction of the red arrow:
